SSD1306 OLED Display
von Edi · 13/06/2020
SSD1306 OLED Display
Das SSD1306 Display ist ein OLED (Organic Light Emitting Diode) Display. Das winzige Display ist gerade einmal 0,96“ groß und eignet sich somit sehr gut für kleine Schaltungen die Informationen über ein HMI (Human Machine Interface) bereitstellen möchten. Die Platine inklusive dem OLED-Display hat die Maße von 23 × 27 mm. Auf der Rückseite kann mittels einem SMD-Widerstand von der Adresse 0×78 (default) auf 0×7A geändert werden, um einen eventuell vorhandenen Adressenkonflikt zu lösen. Diese Aufgedruckte Adresse stimmt aber nicht! Das Display hat 0×3C (default) bzw. 0×3D. Obwohl das Display so winzig ist, verfügt es über eine beachtliche Auflösung von 128 × 64 Pixel.
SSD1306 OLED Display an einem Microcontroller
Das SSD1306 Display hat nur 4 Anschlüsse und ist somit sehr einfach anzuschliessen. Wir haben den VCC und GND für die Spannungsversorgung und VCC kann an 3.3V bis 5V angeschlossen werden. Angesprochen wird das Display über einen I2C-Bus bei den Anschlüssen „SCL (Clock) / SDA (Data)“ Pins.
►SSD1306 OLED Display:
* https://amzn.to/3h0nVfw 2x 128×32 Pixel 0.96 Zoll OLED I2C Display
* https://amzn.to/2AP5J7K – 1x 128×64 Pixel 0.96 Zoll OLED I2C Display
* https://amzn.to/375IVwV – 3x 128×64 Pixel 0.96 Zoll OLED I2C Display
* https://amzn.to/3eYjcJy – 1x 128×64 Pixel 1.3 Zoll OLED I2C Display
* https://amzn.to/2A89JjX – 3x 128×64 Pixel 1.3 Zoll OLED I2C Display
►Node-MCU ESP8266 Board:
* https://amzn.to/2U7Urmn – NodeMCU ESP8266 ESP-12F
* https://amzn.to/2J5wLJ3 – 3er Set, ESP8266 ESP-12F
* https://amzn.to/3belvGd – 5er Set, ESP8266 ESP-12F
►ESP32 und ESP32 Node-MCU Boards:
* https://amzn.to/3erQVKq – ESP32 Node-MCU Board
* https://amzn.to/2Om89OW – 3er Set ESP32 Node-MCU Board
* https://amzn.to/3erIkaS – 5er Set ESP32 Node-MCU Board
* https://amzn.to/2Ct9H7c – 4 Stück ESP32 Module
►Netzteile:
* https://amzn.to/3beWY3V – 2er-Pack USB Ladegerät 5V/2A
* https://amzn.to/398WzP9 – Raspberry Pi 4 Netzteil, USB-C, 5.1V, 3A
* https://amzn.to/2wsS8Bh – HomeSpot Netzteil 3A/5V inkl. 1,5M Micro USB Kabel
►Jumper Wire:
* https://amzn.to/2WxKwIl – Female to Female F2F 40 STK. je 20 cm
* https://amzn.to/2xeKb2V – Set 3 x 40 STK. je 20 cm M2M/ F2M / F2F
►Breadboard:
* https://amzn.to/2QQ7JSL – Breadboard Steckbrett mit 830 Kontakten
►USB Kabel:
* https://amzn.to/2y01THN – USB A auf Micro USB Kabel 0.5m
* https://amzn.to/2xkgqgQ – USB auf Mini USB Kabel 0.5m
* https://amzn.to/2QBxCp7 – USB A zu USB B Kabel 0.5m
Alle Links mit “*” sind Amazon Affiliate Links. Ich bekomme bei einer Bestellung einen kleinen Teil vom Umsatz, ohne das euch dafür Mehrkosten entstehen.